3CP013469 ISDN Pro TA

(3CP013469, 3CP993469, 3CP993469-CIT)



  • Repair Information
  • Configuring Windows XP for the ISDN Pro TA
  • Configuring Windows 2000 for the Courier I and ISDN TA
  • Configuring your Broadband Router for use with the ISDN
  • Windows Dial Up Networking (DUN) error codes
  • Basic troubleshooting skills
  • Modem communication glossary
  • 56K AT command set

  • Install Instructions

  • ISDN TA Serial
  • Additional Support

    If the support information in this section doesn't help you solve your issue, you can contact a USRobotics Help Desk Technician directly.

    Note: In order to prevent your browser from trying to open these files, right-click the file and select Save Target As... to download.

    Manuals and other Documents

    Driver installers and Firmware

    Windows XP
    The correct driver for this modem is already included in XP. Use the "Instant Update" utility that ships with the terminal adapter for any other driver.
    Windows 2000
    Copy this file onto a blank 3.5-inch disk. Click Windows Start, point to Settings, and click Control Panel. Double click Phone and Modem Options, click the Modem tab and remove all instances of the ISDN Pro T/A. Connect the ISDN Pro T/A to a USB port. If installing the ISDN Pro T/A on a serial port you'll need to restart your PC. Windows 2000 will install the ISDN Pro T/A as a Standard Modem. In the Device Manger, double click Standard Modem, click the Driver tab then click Update Driver. In both cases, direct the New Hardware Wizard to the 3.5-inch disk drive to complete the installation. This file should not be used with any other products.
    usrprota.inf10007 bytes03-02-01
    Firmware Update
    Please use the Instant Update utility that ships with the terminal adapter to update it's firmware.

    Tech Support via E-mail E-mail a USRobotics Support Technician.

    Product Registration Activate your USRobotics product warranty online.