USR9107A ADSL2+ 4-Port Router

(USR019107A, USR9107A, 9107A, 64-809107A-00R)

9107a
moreClick for more product images
RoHS

Warranty: 2 Year

FAQs

  • Repair Information
  • Tutorials
  • XP/2000 Printer Installation
  • 98/Me Printer Installation
  • End PPP Connection after inactivity.
  • Ping Procedure

  • Additional Support

    If the support information in this section doesn't help you solve your issue, you can contact a USRobotics Help Desk Technician directly.

    Note: In order to prevent your browser from trying to open these files, right-click the file and select Save Target As... to download.


    Manuals and other Documents

    Troubleshooting

    Installation and Firmware

    BETA Version 1.5 - Annex A only (ADSL over Analog)
    Note: This firmware corrects the following issues::

    1. When Internet Access rules were active, LAN computers in the IAC rules were blocked from browsing LAN resources
    2. When Internet Access rules were active, LAN computers in the IAC rules could not obtain IP addresses from the router
    3. Printing issues with operating systems using Cups 1.2.x and 1.3.x
    USR9107A_070308_Beta1.5.18.bin1.8 MB03-07-08
    Version 1.4 - Annex A only (ADSL over Analog)

    Note: To save and maintain your current settings, such as VPI and VCI variables, it is recommended to use the EasyConfigurator installation utility. Follow the steps below to upgrade your gateway and save your current settings:

    1. Download and install the EasyConfigurator installation utility.
    2. Extract the USR9107A.bin file located below to a temporary directory such as C:\USR.
    3. Launch the EasyConfigurator software.
    4. Select the Advanced tab.
    5. Click browse and select the upgrade file USR9107A.bin.
    6. Click upgrade.
    7. EasyConfigurator will restore the ADSL configuration on successful firmware upgrade.
    USR9107A Release%20Notes1.4.txt1 KB31-03-06
    USR9107A.bin1.8 MB21-03-06

    Installation and Firmware Archive

    EasyConfigurator Version 2.61
    9107a-EC-2.61.zip 45.6 MB 09-03-06
    Version 1.1 - Annex A only
    Note: Version 1.1 - Annex A must use EasyConfigurator Version 2.50 located below
    USR9107Release%20Notes1.1.txt1 KB17-08-05
    USR9107A_080205.bin1.7 MB02-08-05
    9107a-EC-2.50.zip45.5 MB28-02-06

    GPL Source Code

    The GPL Source Code contained in this product is available as a free download from the GPL Code Central

    Tech Support via E-mail E-mail a USRobotics Support Technician.

    Product Registration Activate your USRobotics product warranty online.