USR5630B 56K External Faxmodem

(USR015630B)

5630b
MoreClick for more product images

Warranty: 2 Year

FAQs

  • Repair Information
  • Check the old modem is uninstalled before installation of new modem in 2000/XP?
  • V.92 FAQs
  • V.92 Brief
  • I cannot plug my power supply into my modem
  • V.92 Q&A
  • V.92 technical paper
  • Windows Dial Up Networking (DUN) error codes
  • Basic troubleshooting skills
  • Modem communication glossary
  • 56K AT command set
  • Selfmode SDK
  • IBM Synchronous mode & Courier modems
  • Old Sportster Dip Switches

  • Additional Support

    If the support information in this section doesn't help you solve your issue, you can contact a USRobotics Help Desk Technician directly.

    Note: In order to prevent your browser from trying to open these files, right-click the file and select Save Target As... to download.

    Manuals and other Documents

    Drivers

    Installation for 32 and 64 bit Windows 8, Windows 7, Server 2008, Server 2011, and Server 2012

    The modem will install using the default driver provided by Windows

    Windows Vista & Server 2008, 32 bit and 64 bit Driver
    Note: The modem will initially install using the default driver provided by Windows Vista. Our enhanced driver is available by following the instructions below:
    1. Download the file to a temporary location on your computer's hard disk drive.
    2. Double-click the file and follow the USRobotics Modem Installation Wizard to update modem driver.
    USR5630v6.2.5.5.exe1.1 MB08-02-07
    Windows 95, 98, Me, 2000, XP, Server 2003, XP 64 bit, Server 2003 64 bit Driver
    Note: USRobotics Internet Call Notification, Control Center, and BVRP PhoneTools are not supported on a 64-bit operating system.
    1. Download the 563002.zip file to a temporary location on your computer's hard drive.
    2. To be recognized by Windows, the content of this file must be extracted onto a floppy disk or a folder with an utility like winzip
    3. When prompted by Windows, direct the installation to the temporary location in order to complete the installation.
    563002.zip5 KB01-09-05
    MacOS CCL Files
    BinHex file for all external USRobotics 56K modems.
    U.S.Robotics56Kmodems.hqx51 KB15-11-01

    Firmware

    V.92 Upgraders
    Updating your V.92 modem's Firmware will ensure optimal compatibility with your ISP and will improve your modem's performance.

    There are two ways to update your V.92 modem. To update your V.92 modem, select one of the following options:

    ControlCenter:
    This product's Installation CD-ROM should have ControlCenter on it. If you do not have ControlCenter on your Installation CD-ROM, you can download it below. Use the Instant Update utility in ControlCenter once installed.
    Stand alone upgrader Firmware version 11.16.63:
    To update your V.92 modem via the stand alone upgrader, simply download the upgrader below, run the .exe file, and follow the on-screen instructions.
    Firmware version 11.16.63316 KB 05-04-05
    Linux Stand alone flasher and Checksum
    Linux5630.01.02.04.B_V11.16.63.tgz127 KB27-04-05
    Linux5630.01.02.04.B_
    V11.16.63.tgz.md5
    1 KB27-04-05

    Firmware Archive

    Firmware version 11.16.39895 KB 09-12-03

    Software

    ControlCenter
    Analog modem configuration software
    ControlCenter United Kingdom (English) 7.5 MB15-03-03
    BVRP PhoneTools
    Modem communications application
    BVRP PhoneTools
    ICN
    Internet Call Notification for V.92 modems.
    ICN page

    Tech Support via E-mail E-mail a USRobotics Support Technician.

    Product Registration Activate your USRobotics product warranty online.