With this new firmware, the user can connect to the Access Point using a static IP address if no DHCP server is available. The default LAN IP address of the Access Point is 192.168.1.64.
Download this file to a temporary location on your computer's hard disk drive.
To upgrade your USRobotics Wireless MAXg Access Point with all operating systems, open an Internet browser and enter the device's IP address.
Enter your User name and Password. Click OK.
Click Device in the main menu.
Under the "Upgrade Access Point" section, enter the location of the USR5455-v18.104.22.168.2.usr file in the text box, or click the Browse button to search for the file. Then click the Upgrade button to begin the upgrade process.
When the upgrade process is complete, the device will reboot. To re-establish a connection with your device, wait approximately 15 seconds and click Continue.