USR9107A ADSL2+ 4-Port Router

(USR029107A, USR9107A, 9107A, 64-809107A-00R)

9107a
moreKlicken Sie hier für mehr Informationen
RoHS

Garantie: 2 Jahre

Fragen und Antworten auf Englisch

  • Reparatur Informationen
  • Lernprogramme
  • XP/2000 Printer Installation
  • 98/Me Printer Installation
  • End PPP Connection after inactivity.
  • How do I set my ADSL2+ Router to send system log data to an external logging program?
  • Ping Procedure

    • Zusätzlicher Support

    Sollten die Informationen auf dieser Seite Ihnen nicht geholfen haben, Ihr Problem zu lösen, so kontaktieren Sie bitte unseren Technischen Support.

    		 Hinweis: Um die folgenden Dokumente als Download zur Verfügung gestellt zu bekommen, klicken Sie bitte mit der rechten Maustaste auf die entsprechende Datei und wählen Ziel speichern unter ("Save Target As...").


    Handbücher und andere Dokumente

    Fehlerbehebung

    Installation und Firmware

    BETA Version 1.5 - Annex A only (ADSL over Analog)
    Note: This firmware corrects the following issues::

    1. When Internet Access rules were active, LAN computers in the IAC rules were blocked from browsing LAN resources
    2. When Internet Access rules were active, LAN computers in the IAC rules could not obtain IP addresses from the router
    3. Printing issues with operating systems using Cups 1.2.x and 1.3.x
    USR9107A_070308_Beta1.5.18.bin1.8 MB03-07-08
    Version 1.4 - Annex A only (ADSL over Analog)

    Hinweis: To save and maintain your current settings, such as VPI and VCI variables, it is recommended to use the EasyConfigurator installation utility. Follow the steps below to upgrade your gateway and save your current settings:

    1. Download and install the EasyConfigurator installation utility.
    2. Extract the USR9107A.bin file located below to a temporary directory such as C:\USR.
    3. Launch the EasyConfigurator software.
    4. Select the Advanced tab.
    5. Click browse and select the upgrade file USR9107A.bin.
    6. Click upgrade.
    7. EasyConfigurator will restore the ADSL configuration on successful firmware upgrade.
    USR9107A Release%20Notes1.4.txt1 KB31-03-06
    USR9107A.bin1.8 MB21-03-06
    Version 1.4 - Annex B only (ADSL over ISDN)

    Hinweis: To save and maintain your current settings, such as VPI and VCI variables, it is recommended to use the EasyConfigurator installation utility. Follow the steps below to upgrade your gateway and save your current settings:

    1. Download and install the EasyConfigurator installation utility.
    2. Extract the USR9107B.bin file located below to a temporary directory such as C:\USR.
    3. Launch the EasyConfigurator software.
    4. Select the Advanced tab.
    5. Click browse and select the upgrade file USR9107B.bin.
    6. Click upgrade.
    7. EasyConfigurator will restore the ADSL configuration on successful firmware upgrade.
    USR9107A Release%20Notes1.4.txt1 KB31-03-06
    USR9107B.bin1.8 MB21-03-06

    Installation und Firmware Archive

    EasyConfigurator Version 2.61
    9107a-EC-2.61.zip 45.6 MB 09-03-06
    Version 1.1 - Annex A only
    Hinweis: Version 1.1 - Annex A must use EasyConfigurator Version 2.50 located below
    USR9107Release%20Notes1.1.txt1 KB17-08-05
    USR9107A_080205.bin1.7 MB02-08-05
    9107a-EC-2.50.zip45.5 MB28-02-06
    Version 1.1 - Annex B only (ADSL over ISDN)
    Hinweis: Version 1.1 - Annex B must use EasyConfigurator Version 2.50 located below
    USR9107Release%20Notes1.1.txt1 KB17-08-05
    USR9107A_080205.bin1.7 MB16-08-05
    9107a-EC-2.50.zip45.5 MB28-02-06

    GPL Quelltext

    Der in diesem Produkt verwendete GPL Quelltext, steht als Download über GPL Code Central zur Verfügung.

    Technischer Support per E-mail E-mail an einen Support-Techniker von USRobotics senden.

    Produktregistrierung Aktivieren Sie Ihre Produktgarantie von USRobotics online.