• Printing issues with CUPS version 1.2.

• DST (Daylight Saving time) Firewall issue with how IAC (Internet Access Control) works.
• PPPoE server disconnect/reconnect
• PPPoE inactivity timer
• PPTP client disconnect/reconnect
• backup/restore settings

Note: If upgrading from Version 3.91.37.0.3, follow these instructions before proceeding.

1. With a thin tool, such as a paper clip, briefly press the RESET button on the back of the router.
2. Wait about 30 seconds.

Important: To ensure a successful upgrade, please perform the firmware upgrade from a client that is physically wired to the router. A wireless client may become disassociated from the router during the upgrade process resulting in an incomplete upgrade.

1. Laden Sie diese Datei vorläufig auf einen Speicherplatz des Festplattenlaufwerkes Ihres Computers.
2. To upgrade your USRobotics Wireless MAXg Router with all operating systems, open an Internet browser and enter the router's IP address. The default IP address of the router is 192.168.2.1
3. Geben Sie Ihren Benutzernamen und Ihr Passwort ein. Gehen Sie dann auf OK.
4. Click Device in the main menu.
5. Under the "Upgrade Router" section, enter the location of the USR5461-v3.93.35.0.8.usr File in die Textbox ein oder gehen Sie auf de Browse Button um nach den File zu suchen. Sobald das Upgrade Programm abgeschlossen ist, startet der Access Point neu.
6. When the upgrade process is complete, the router will reboot. To re-establish a connection with your router, wait approximately 15 seconds and click Continue.