USR5450 802.11g Multi-Function Access Point

(USR805450)

5450
More imagesKlicken Sie hier für mehr Informationen

Garantie: 2 Jahres

Fragen und Antworten auf Englisch

  • Reparatur Informationen
  • Was ist ein 802.11 Wireless Netzwerk?
  • When will the 125 Mbps upgrade be available?
  • How is 100Mbps achieved?
  • Uneinheitliche Netzgüte?
  • Do I have the correct drivers?
  • What is my default Login and Password?
  • Wireless range performance
  • Wireless Antenna Use
  • How do I enter a 256-bit WEP Key in Windows XP?
  • How do I enable the USRobotics Wireless Hilfsmittel in Windows XP?
  • Wireless LANs – Are They Safe?

    • Zusätzlicher Support

    Sollten die Informationen auf dieser Seite Ihnen nicht geholfen haben, Ihr Problem zu lösen, so kontaktieren Sie bitte unseren Technischen Support.

    		Hinweis: Um die folgenden Dokumente als Download zur Verfügung gestellt zu bekommen, klicken Sie bitte mit der rechten Maustaste auf die entsprechende Datei und wählen Ziel speichern unter ("Save Target As...").

    Handbücher und andere Dokumente

    Released Firmware und Hilfsmittel

    Hinweis: It is critical that the AP have a valid IP Address before trying to update the firmware. Since the update process uses TFTP, a valid network IP Address is required. 0.0.0.0 is not a valid IP address.
    125 Mbps Upgrade
    Firmware Update - Version 1.53b10

    Hinweis: Previous configuration utilities cannot be used with firmware version 1.53b10. After upgrading the firmware, it is necessary to uninstall your previous Hilfsmittel and install the latest Hilfsmittel Version 1.53b7.

    Hinweis: If you are upgrading from version 1.41, your access point will retain its custom settings. Backup settings files from 1.41 firmware cannot be used to restore your settings after you have upgraded the firmware. It is recommended that you save your custom settings to a file after upgrading.

    Hinweis: If you are upgrading from version 1.31 or older, your access point will reset to the factory default settings. Previous backup settings files from older firmware cannot be used to restore your settings. It is recommended to write down all of your custom settings before upgrading. After upgrading your firmware, reconfigure your Access Point, and then save your custom settings to a file.

    1. Download the usr5450_153b10 file located below.
    2. Click 153b10_upgrade_procedure.txt below and follow the upgrade procedures.
    153b10_upgrade_procedures.txt 2 KB 02-23-05
    usr5450_153b10.bin 896 KB 01-25-05
    1.53b10_release_notes.txt 1 KB 02-23-05
    Hilfsmittel - Version v1.53b7

    Hinweis: This utility can only be used in conjunction with firmware 1.53b10.

    1. Download the USR5450_utility_1.53b7.exe file located below.
    2. Doppelklick auf USR5450_utility_1.53b7.exe file to start the installation process.
    3. Follow the prompts to complete the installation.
    USR5450_utility_1.53b7.exe 1.63 MB 01-05-05

    Archive

    Firmware Update - Version 1.41

    Hinweis: Previous configuration utilities cannot be used with firmware version 1.41. After upgrading the firmware, it is necessary to uninstall your previous Hilfsmittel and install the latest Hilfsmittel Version v1.42b1.

    Hinweis: Upgrading to version 1.41 below will reset your access point to the factory default settings, including your password. Previous backup settings files from older firmware cannot be used to restore your settings. It is recommended to write down all of your custom settings before upgrading.

    1. Download the USR5450_141.bin file located below.
    2. Click firmware1.41_upgrade_procedure.txt below and follow the upgrade procedures.
    firmware1.41_upgrade_procedures.txt 1.22 KB 04-22-04
    USR5450_141.bin 896 KB 03-22-04
    firmware1.41_release_notes.txt 1 KB 04-22-04
    Hilfsmittel - Version v1.42b1

    Hinweis: This utility can only be used in conjunction with firmware 1.41.

    1. Download the USR5450_Utility_1.42b1.exe file located below.
    2. Doppelklick auf USR5450_Utility_1.42b1.exe file to start the installation process.
    3. Follow the prompts to complete the installation.
    USR5450_Utility_1.42b1.exe 1.63 MB 04-07-04
    Hinweis: Firmware versions 1.19 and 1.31 require the use of Hilfsmittel 4.01E.
    Firmware Update version 1.31

    Hinweis: This firmware update provides support for the following Advanced Modes - AP Client, Bridging, Multi-Bridging, and Repeater.

    firmware_upgrade_procedure.txt 1.08 KB 09-30-03
    USR5450_131.bin 896 KB 09-30-03
    Ursprünglicher Firmware version 1.19
    firmware_upgrade_procedure.txt 1.08 KB 07-27-03
    USR5450_119.bin 896 KB 07-27-03
    Hilfsmittel - Version USR04_4.01E
    utility_upgrade_procedure.txt 238 KB 07-29-03
    USR5450_APUtility_1.1E.exe 1.6 MB 07-29-03

    Technischer Support per E-mail E-mail an einen Support-Techniker von USRobotics senden.

    Produktregistrierung Aktivieren Sie Ihre Produktgarantie von USRobotics online.