USR805450 802.11g Multi-Function Access Point

(USR805450)

5450
More imagesClick for more product images

Garantie: 2 ans

FAQs en anglais

  • Réparations
  • Qu’est ce que le réseau sans fil?
  • How is 125 Mbps achieved?
  • Mixed-network performance?
    • · Do I have the correct drivers?
    · What is my default Login et Password?
  • Wireless range performance
  • Wireless Antenna Use
  • How do I enter a 256-bit WEP Key in Windows XP?
  • How do I enable the USRobotics Wireless Configuration Utilitaire in Windows XP?
  • Wireless LANs – Are They Safe?

    • Support additional

    If the support information in this section doesn't help you solve your issue, envoyez un E-mail à un technicien du support technique USRobotics.

    		 Note: In order to prevent your browser from trying to open these files, right-click the file et select Save Target As... to download.

    Manuels et d'autres documents

    Released Firmware and Configuration Utility

    Note: It is critical that the AP have a valid IP Address before trying to update the firmware. Since the update process uses TFTP, a valid network IP Address is required. 0.0.0.0 is not a valid IP address.
    125 Mbps Upgrade
    Mises à jour du firmware - Version 1.53b10

    Note: Previous configuration utilities cannot be used with firmware version 1.53b10. After upgrading the firmware, it is necessary to uninstall your previous configuration utility and install the latest Configuration Utility Version 1.53b7.

    Note: If you are upgrading from version 1.41, your access point will retain its custom settings. Backup settings files from 1.41 firmware cannot be used to restore your settings after you have upgraded the firmware. It is recommended that you save your custom settings to a file after upgrading.

    Note: If you are upgrading from version 1.31 or older, your access point will reset to the factory default settings. Previous backup settings files from older firmware cannot be used to restore your settings. It is recommended to write down all of your custom settings before upgrading. After upgrading your firmware, reconfigure your Access Point, and then save your custom settings to a file.

    1. Download the usr5450_153b10 file located below.
    2. Click 153b10_upgrade_procedure.txt below and follow the upgrade procedures.
    153b10_upgrade_procedures.txt 2 KB 02-23-05
    usr5450_153b10.bin 896 KB 01-25-05
    1.53b10_release_notes.txt 1 KB 02-23-05
    Mises à jour du firmware - Version v1.53b7

    Note: This utility can only be used in conjunction with firmware 1.53b10.

    1. Download the USR5450_utility_1.53b7.exe file located below.
    2. Double-click the USR5450_utility_1.53b7.exe file to start the installation process.
    3. Follow the prompts to complete the installation.
    USR5450_utility_1.53b7.exe 1.63 MB 01-05-05

    Archive

    Mises à jour du firmware - Version 1.41

    Note: Previous configuration utilities cannot be used with firmware version 1.41. After upgrading the firmware, it is necessary to uninstall your previous configuration utility and install the latest Configuration Utility Version v1.42b1.

    Note: Upgrading to version 1.41 below will reset your access point to the factory default settings, including your password. Previous backup settings files from older firmware cannot be used to restore your settings. It is recommended to write down all of your custom settings before upgrading.

    1. Download the USR5450_141.bin file located below.
    2. Click firmware1.41_upgrade_procedure.txt below and follow the upgrade procedures.
    firmware1.41_upgrade_procedures.txt 1.22 KB 04-22-04
    USR5450_141.bin 896 KB 03-22-04
    firmware1.41_release_notes.txt 1 KB 04-22-04
    Configuration Utility - Version v1.42b1

    Note: This utility can only be used in conjunction with firmware 1.41.

    1. Download the USR5450_Utility_1.42b1.exe file located below.
    2. Double-click the USR5450_Utility_1.42b1.exe file to start the installation process.
    3. Follow the prompts to complete the installation.
    USR5450_Utility_1.42b1.exe 1.63 MB 04-07-04
    Note: Firmware versions 1.19 et 1.31 require the use of configuration utilitaire 4.01E.
    Mises à jour du firmware version 1.31

    Note: This Mises à jour du firmware provides support for the following Advanced Modes - AP Client, Bridging, Multi-Bridging, et Repeater.

    firmware_upgrade_procedure.txt 1.08 KB 09-30-03
    USR5450_131.bin 896 KB 09-30-03
    Firmware Version initiale. version 1.19
    firmware_upgrade_procedure.txt 1.08 KB 07-27-03
    USR5450_119.bin 896 KB 07-27-03
    Configuration Utilitaire - Version USR04_4.01E
    utility_upgrade_procedure.txt 238 KB 07-29-03
    USR5450_APUtility_1.1E.exe 1.6 MB 07-29-03

    Support technique pare E-mail Courrier électronique à un technicien du support technique

    Enregistrement de garantie Activez votre enregistrement USRobotics en ligne.