V.92 in Detail
An International Standard for Data Access
The V.92 standard enhances V.90 in three major ways. First, V.92 provides a faster, more balanced upstream to complement the 56 kilobits per second (Kbps) downstream rate found in x2 and V.90 technologies. Second, V.92 defines a mechanism for significantly shortening the dialup connection time. Third, V.92 provides a method for effectively sharing a data line with voice functionality.
The V.90 standard defined 56 Kbps as the maximum rate for transfers. Unfortunately, this rate was restricted to downloads (transfers from a server or service provider to an individual user). Uploads remained limited to the same maximum speed as V.34 (33.6 Kbps). For users who mostly receive data, this is a minor inconvenience, but V.90 offers limited benefit to users who need to send data to or interact with a service.
V.92 addresses this issue by providing a faster upload path. At the user’s discretion, V.92 can be set for a more balanced data transfer rate, with both upstream and downstream speeds up to 48 Kbps. This option allows users to transfer greater quantities of data to a server or service provider. The more balanced rates of V.92 make interactive data communication activities like videoconferencing run more smoothly with a higher level of quality than V.90. The new standard also provides improved download performance; any transfer that requires active acknowledgment will run faster with V.92.
One of the hidden costs of modem use is the delay incurred by the “training session” modems normally do every time a data connection is established. USRobotics has long sought to minimize this delay, and V.92 continues this effort with its Quick Connect feature.
A V.92 modem “remembers” the connection conditions each time it is used and tests for similar conditions each time it connects. If the conditions match those from the last time the modem was used, V.92 restores the previous connection, cutting 30 to 50 percent off the normal training time.
In the case of a typical desktop computer setup, which often dials the same Internet service provider (ISP) point of presence (POP) from the same phone line every time, this situation will be common. The Quick Connect feature makes occasional use of the Internet much more convenient.
Modem on Hold
The explosive growth of data communications has caused a subtle, but persistent challenge: sharing the phone line. Households have been forced to choose either the continuing expense of a second phone line or the inconvenience of losing access to incoming telephone calls while online. Phone companies offer voice mail services that intercept an incoming call while a user is online; the service indicates who called, but does nothing to prioritize the data-vs.-voice access decision. In short, users have little choice but to stay offline if an important call is expected.
V.92 addresses this issue directly by providing a mechanism to detect inbound calls. A V.92 modem recognizes the standard Call Waiting signaling provided by the phone company and indicates to the user that there is an incoming call. If the phone company provides Caller ID information along with the Call Waiting signal, then this information is also provided to the V.92 modem user. A user who is online can then determine, on a call-by-call basis, whether the inbound call is important enough to interrupt the current online session.
V.92 extends the convenience of this call detection mechanism further by permitting a user to suspend his or her current online session and answer the inbound voice call. This has benefits for both the user and the ISP.
The user gains the ability to answer a voice call while remaining online. When the Call Waiting indication comes on, the user simply opts to answer the call. The user’s V.92 modem then negotiates with the Internet service provider’s modem and switches the line to the incoming voice call. Once this call is completed, the user can attempt to reestablish a connection with the ISP. The ISP will permit the online session to be resumed as long as the voice call has not exceeded the time limit chosen by the ISP.
The benefit to the service provider is that now phone company signals are handled gracefully on the user’s end. When the user wants to answer another call, the ISP is informed by the user’s modem. The service provider’s modem can either permit or deny the user modem’s request. If it accepts the request, then the ISP modem provides a timeout to the user’s modem. If the user does not leave the voice call and return to the data connection before the timeout period expires, the ISP modem terminates the call.
With V.90 and older modems, the reaction to a signal like Call Waiting was unpredictable. In many cases, the ISP modem would be forced to renegotiate a connection with the user modem. In extreme cases, the link between the user modem and the ISP would be lost. To a user who received no indication that a second call was inbound, this appeared as if the service provider had dropped the connection for no reason. V.92 offers a way to clarify, and in many cases eliminate, the confusion that phone company signaling can cause.
Quali sono i diversi tipi di modem?