USR9106 SureConnect ADSL Wireless Gateway

(USR999106)

9106
moreClick for more product images

Warranty: 2 Year

FAQs

  • Repair Information
  • What is 802.11 wireless networking?
  • End PPP Connection after inactivity.
  • If my ADSL provider does not require a password, how do I configure my PPP settings?
  • Implementing Wireless Security
  • Power Supply Update
  • Ping Procedure
  • Wireless range performance
  • Connecting Your Gaming Console

    • Additional Support

    If the support information in this section doesn't help you solve your issue, you can contact a USRobotics Help Desk Technician directly.

    		Note: In order to prevent your browser from trying to open these files, right-click the file and select Save Target As... to download.


    Manuals and other Documents

    Troubleshooting

    Installation and Firmware

    Warning: Turning off your modem during the upgrade process may cause permanent damage.
    Version 2.5 - Annex A only (ADSL over Analog)

    Read this before you upgrade your USR9106 SureConnect ADSL Wireless Gateway.

    Note: Upgrades using this release will reset the modem to the factory default settings. Do not turn off the power or disconnect any cables from your modem until the upgrade process is complete. To save and maintain your current settings, such as VPI and VCI variables, you must use the EasyConfigurator 2.39 installation utility. Follow the steps below to upgrade your gateway and save your current settings:

    1. Download and install the EasyConfigurator 2.39 installation utility.
    2. Extract the 9106_USR96345GW_Release.2.5.bin file located below to a temporary directory such as C:\USR.
    3. Launch the EasyConfigurator software.
    4. Select the Advanced tab.
    5. Click browse and select the upgrade file 9106_USR96345GW_Release.2.5.bin.
    6. Click upgrade.
    7. EasyConfigurator will restore the ADSL configuration on successful firmware upgrade.
    Release_notes_2.5.txt2 KB19-05-05
    9106_USR96345GW_Release.2.5.bin1.9 MB21-04-05

    Installation and Firmware Archive

    Version 2.3 - Annex A only
    Release_notes_2.3.txt2 KB11-03-05
    9106_USR96345GW_Release2.3.bin1.8 MB25-02-05
    Version 2.1 - Annex A only
    Release_notes_2.1.txt1.49 KB21-05-04
    9106_96345GW_Release2.1.bin1.83 MB19-05-04
    Initial Firmware Release
    9106_96345GW_Release1.bin1.82 MB23-01-04

    GPL Source Code

    The GPL Source Code contained in this product is available as a free download from the GPL Code Central

    Technische (product-)ondersteuning E-mail a USRobotics Support Technician.

    Garantie registreren Activeer uw USRobotics productgarantie online.

    Internationale contactpersonen Zoek informatie voor uw land of regio.