USR9108 Wireless MAXg ADSL2+ Gateway

(USR9108, USR019108, 809108)

9108
moreClick for more product images

Warranty: 2 Year

FAQs

  • Repair Information
  • Tutorials
  • Vista Printer Installation
  • XP/2000 Printer Installation
  • 98/Me Printer Installation
  • End PPP Connection after inactivity.
  • Implementing Wireless Security
  • Ping Procedure
  • How do I set my ADSL2+ Router to send system log data to an external logging program?
  • Configure Windows' Utility to connect using 802.11x (RADIUS server)
  • Wireless range performance
  • What is 802.11 wireless networking?

  • Additional Support

    If the support information in this section doesn't help you solve your issue, you can contact a USRobotics Help Desk Technician directly.

    Note: In order to prevent your browser from trying to open these files, right-click the file and select Save Target As... to download.


    Manuals and other Documents

    Troubleshooting

    Installation and Firmware

    BETA Version 1.8 - Annex A only (ADSL over Analog)

    Note: This firmware corrects the following issues:

    1. When Internet Access rules were active, LAN computers in the IAC rules were blocked from browsing LAN resources
    2. When Internet Access rules were active, LAN computers in the IAC rules could not obtain IP addresses from the router
    3. Printing issues with operating systems using Cups 1.2.x and 1.3.x
    USR9108A_062608_Beta10.01.08.bin3.12 MB26-06-08
    VPN Upgrade Version 1.5 - Annex A only (ADSL over Analog)

    Note: This firmware adds the VPN (IPSec) capability.This firmware adds the VPN (IPSec) capability. Details of requirements and how to operate the feature are contained in the VPN Termination Document.

    1. Download and install the EasyConfigurator installation utility.
    2. Extract the USR9108A-07-19-06.bin file located below to a temporary directory such as C:\USR.
    3. Launch the EasyConfigurator software.
    4. Select the Advanced tab.
    5. Click browse and select the upgrade file USR9108A-07-19-06.bin.
    6. Click upgrade.
    7. EasyConfigurator will restore the ADSL configuration on successful firmware upgrade.
    USR9108ReleaseNotes1.5.txt1 KB26-04-07
    USR9108A-07-19-06.bin3.1 MB19-07-06
    Version 1.3 - Annex A only (ADSL over Analog)

    Note: To save and maintain your current settings, such as VPI and VCI variables, it is recommended to use the EasyConfigurator installation utility. Follow the steps below to upgrade your gateway and save your current settings:

    1. Download and install the EasyConfigurator installation utility.
    2. Extract the USR9108A.bin file located below to a temporary directory such as C:\USR.
    3. Launch the EasyConfigurator software.
    4. Select the Advanced tab.
    5. Click browse and select the upgrade file USR9108A.bin.
    6. Click upgrade.
    7. EasyConfigurator will restore the ADSL configuration on successful firmware upgrade.
    USR9108ReleaseNotes1.3a.txt1 KB06-03-06
    USR9108A.bin2.4 MB17-02-06

    Installation and Firmware Archive

    EasyConfigurator Version 2.61
    9108a-EC-2.61.zip 45.6 MB 09-03-06
    Version 1.0 - Annex A only
    Note: Version 1.0 - Annex A must use EasyConfigurator Version 2.50 located below
    USR9108ReleaseNotes1.0.txt1 KB17-08-05
    USR9108A-06-13-05.bin2.1 MB13-06-05
    9108-EC-2.50.zip45.5 MB28-02-06

    GPL Source Code

    The GPL Source Code contained in this product is available as a free download from the GPL Code Central

    Tech Support via E-mail E-mail a USRobotics Support Technician.

    Product Registration Activate your USRobotics product warranty online.

    International Contacts Find information on your country or region.