Kılavuz ve diğer Belgeler |
|
|
Sorun Giderme |
|
|
Bellenim |
Bellenim Sürüm 3.93.35.0.8
With this new firmware, the user can connect to the Access Point using a static IP address if no DHCP server is available. The default LAN IP address of the Access Point is 192.168.1.64.
- Download this file to a temporary location on your computer's hard disk drive.
- To upgrade your USRobotics Wireless MAXg Access Point with all operating systems, open an Internet browser and enter the device's IP address.
- Enter your User name and Password. Click OK.
- Click Device in the main menu.
- Under the "Upgrade Access Point" section, enter the location of the USR5451-v3.93.35.0.8.usr file in the text box, or click the Browse button to search for the file. Then click the Upgrade button to begin the upgrade process.
- When the upgrade process is complete, the device will reboot. To re-establish a connection with your device, wait approximately 15 seconds and click Continue.
|
| USR5451-v3.93.35.0.8.usr |
1.36 MB |
30-10-06 |
|
| GPL Kaynak Kodu |
| Bu üründe bulunan GPL Kaynak Kodu, GPL Kod Merkezinden ücretsiz olarak yüklenebilir |
Arşiv |
Bellenim Sürümü 3.93.35.0.6
|
| This firmware adds support for Radius authentication with WPA2/WPA and improves MAXg wireless multicast performance. |
| USR5451A-v3.93.35.0.6.usr |
1.5 MB |
06-01-06 |
|
Bellenim Sürümü 3.91.37.0.3
|
| USR5451-v3.91.37.0.3.usr |
1.5 MB |
22-11-05 |
Software |
| MAXg Detection Yardımcı Programlar |
| MAXg Detection Yardımcı Programlar is a tool için Windows which will identify the USR5451 on your network and open a web browser to the management interface. |
| usrmaxg-detect-setup-1.05.exe |
2.03 MB |
25-01-06 |
Daha fazla ürün görüntüsü için tıklayınız